T: +44 (0)7960 290191
PLEASE CONTACT US FOR AVAILABILITY & PRICE
J9146AR
Hewlett Packard Enterprise 2910-24G-PoE+ al, ProCurve. Switch type: Managed, Switch layer: L3, MIB support: MIB II, Bridge MIB, RIPv2 MIB, RMONv2 MIB, SMON MIB, RADIUS Client MIB, RADIUS Accounting MIB, Ether. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000). Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. MAC address table: 16000 entries, Switching capacity: 128 Gbit/s, Throughput: 95 Mpps. Form factor: 1U, Safety: EN 60950/IEC 60950; CAN/CSA 22.2 No. 60950; EN 60825; UL 60950
The HP 2910 al Switch Series consists of four switches: the HP 2910-24G al and 2910-24G-PoE+ al Switches with 24 10/100/1000 ports, and the HP 2910-48G al and 2910-48G-PoE+ al Switches with 48 10/100/1000 ports. Each switch has four dual-personality ports for 10/100/1000 or mini-GBIC connectivity. In addition, the 2910 al Switch Series supports up to four optional 10 Gigabit Ethernet (CX4 and/or SFP+) ports, thereby offering the most flexible and easy-to-deploy uplinks in its class. Together with static and RIP IPv4 routing, robust security and management, enterprise-class features, free lifetime warranty, and free software updates, the 2910 series is a cost-effective, scalable solution for customers who are building high-performance networks. These switches can be deployed at enterprise edge and remote branch offices, converged networks, and data center top of rack.\n\nFeatures\n\nQuality of Service (QoS)\n- Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues\n- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers\n- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ\n- Rate limiting: per-port ingress enforced maximums\n\nConnectivity\n- 10 Gbps Ethernet connectivity: up to four optional and flexible 10-Gigabit ports (CX4 and/or SFP+), with optional interconnect kit for short-distance connectivity\n- IPv6: IPv6 host: allows the switches to be managed and deployed at the edge of IPv6 networks . Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols. MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network.\n- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras\n- IEEE 802.3at Power Over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE/PoE+ powered devices such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras\n- Pre-standard PoE support: detects and provides power to pre-standard PoE devices\n\nPerformance\n- High-performance architecture: 128 Gbps switching fabric with up to 95 Mpps (24-port switches) and 176 Gbps switching fabric with up to 131 Mpps (48-port switches)\n- Selectable queue configurations: allow you to increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications\n\nResiliency and high availability\n- IEEE 802.1s Multiple Spanning Tree: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; provides legacy support for IEEE 802.1d and IEEE 802.1w\n- IEEE 802.3ad Link Aggregation Protocol (LACP) and HP port trunking: support up to 24 trunks, each with up to 8 links (ports) per trunk\n- Optional redundant power supply: supplies backup power in case of power failure (note: HP E620 Redundant/External Power Supplyprovides only RPS functionality)\n\nManageability\n- RMON, XRMON, and sFlow: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events\n- Uni-Directional Link Detection (UDLD): monitors a link between two switches and blocks the ports on both ends of the link if the link goes down at any point between the two devices\n- Command authorization: leverages RADIUS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail\n- Dual flash images: provides independent primary and secondary operating system files for backup while upgrading\n- Multiple configuration files: allow multiple configuration files to be stored to a flash image\n\nLayer 2 switching\n- VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously\n- GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs\n- Jumbo packet support: supports up to 9220-byte frame size to improve the performance of large data transfers\n- IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs\n\nLayer 3 routing\n- Static IP routing: provides manually configured routing; includes ECMP capability\n- Routing Information Protocol (RIP): provides RIPv1 and RIPv2 routing
View other products by HP please click here
Telephone +44 (0)7960 290191
Email requests@mci4trade.com
MCi4Trade a member of MCi International based from our head office in Sheffield, South Yorkshire has developed a comprehensive network of specialist associates across the UK and overseas. Our team of brokers are dedicated, well-qualified, enthusiastic and highly experienced in their specialised fields. We pride ourselves on our professional staff with a varied range of qualifications, many of whom can communicate with our clients in their native language.
With over 30 years experience in the trade we are experts in securing new and used equipment. Buying & Selling to clients across the globe.
Our used and refurbished IT equipment is always tested and warrentied for a minimum of 30 days.
MCi 4Trade and help you with sourcing / purchasing legacy equipment that can help extend the life of your IT kit without replacing infrastructure.
Consider our extended warranty services including warranties of upto 12 months on some of our used/refurbished ranges.
