3500-24G-PoE yl | HP J8692AR

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J8692AR

Hewlett Packard Enterprise 3500-24G-PoE yl, ProCurve. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000). Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. MAC address table: 64000 entries, Switching capacity: 101.8 Gbit/s, Throughput: 75.7 Mpps. Form factor: 1U, Colour of product: Grey

The HP 3500 Switch Series consists of advanced intelligent-edge switches, available in 24-port and 48-port fixed-port models. The foundation for these switches is a purpose-built, programmable HP ProVision ASIC that allows the most demanding networking features, such as quality of service (QoS) and security, to be implemented in a scalable yet granular fashion.\n\nWith a variety of Gigabit Ethernet and 10/100 interfaces; integrated PoE+, PoE, and non-PoE options; and versatile 10GbE connectivity (CX4, X2, and SFP+) on Gigabit Ethernet switches, the 3500 Switch Series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.\n\nFeatures\n\nSoftware-defined networking\n- OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths\n\nQuality of Service (QoS)\n- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis\n- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers\n- Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues\n- Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.\n- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ\n\nManagement\n- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network\n- RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events\n- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications\n- Uni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops\n- Management simplicity: common software features and CLI implementation across all ProVision-based switches (including the zl and yl switches)\n\nConnectivity\n- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras\n- IEEE 802.3at Power over Ethernet Plus (PoE+): provides up to 30 W per port to IEEE 802.3 for devices that use PoE/PoE+, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras\n- Prestandard PoE support: detects and provides power to prestandard PoE devices\n- Jumbo frames: on Gigabit Ethernet and 10-Gigabit Ethernet ports, jumbo frames allow high-performance remote backup and disaster-recovery services\n- Auto-MDIX: provides automatic adjustments for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

J8692AR Specifications

Management features
Switch type: Managed
Switch layer: L3
MIB support: Y
Quality of Service (QoS) support: Yes
Multicast support: Yes
Web-based management: Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 24
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
Combo SFP ports quantity: 4
Networking
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Full duplex: Yes
Flow control support: Yes
Link aggregation: Yes
Rate limiting: Yes
DHCP client: Yes
DHCP server: Yes
IP routing: Yes
IGMP snooping: Yes
Auto MDI/MDI-X: Yes
Routing entries: 10000
10G support: Yes
VLAN support: Yes
Auto-sensing: Yes
Data transmission
MAC address table: 64000 entries
Switching capacity: 101.8 Gbit/s
Throughput: 75.7 Mpps
Latency (1 Gbps): 3.4 ?s
Latency (10 Gbps): 2.1 ?s
Jumbo frames support: Yes
Security
MAC address filtering: Yes
Access Control List (ACL): Yes
SSH/SSL support: Yes
Design
Rack mounting: Yes
Form factor: 1U
Colour of product: Grey
Performance
Stackable: Yes
Built-in processor: Freescale PowerPC 8540
Processor frequency: 666 MHz
Internal memory: 256 MB
Memory type: DDR SDRAM
Flash memory: 4 MB
Power
AC input voltage: 100-240 V
Power supply included: No
AC input frequency: 50/60 Hz
Power consumption (typical): 98 W
Power over Ethernet (PoE)
Power over Ethernet (PoE): Yes
Total Power over Ethernet (PoE) budget: 398 W
Operational conditions
Heat dissipation: 865 BTU/h
Weight & dimensions
Width: 44.3 cm
Depth: 39.2 cm
Height: 4.4 cm
Weight: 6.4 kg
J8692AR Stock

Why Choose MCi4Trade

New and Refurbished Stock!
Competitive prices helping increase your Margins!
We can source hard to find / legacy kit!
International Shipping.
Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.