E4202-72 vl Switch | HP J8772B

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J8772B

Hewlett Packard Enterprise E4202-72 vl Switch. Switch type: Managed, MIB support: Repeater MIB; Ethernet Interface MIB; IEEE 802.3 Ethernet MIB. Console port: RS-232. Switching capacity: 38.4 Gbit/s, Throughput: up to 22.4 million pps, Maximum data transfer rate: 0.1 Gbit/s. Supported network protocols: RFC 783 TFTP; RFC 1542 BootP; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 SNTP; RF. Safety: CSA 22.2 No. 950; UL 60950; EN 60950, Electromagnetic compatibility: FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; CISPR 22 Class A; EN 55024; IEC/EN 61000-3-2;

The HP 4200 vl Switch Series consists of modular chassis that provide a flexible, cost-effective LAN solution as an alternative to stackable switches. These switches offer a proven chassis form factor with high quality and reliability in 10/100, 10/100/1000, and 10-Gigabit scalable solutions that integrate easily into any network.

Quality of Service (QoS)
\n• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues

\nManagement
\n• Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops

\nConnectivity
\n• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

\nPerformance
\n• Architecture: up to 76.8 Gbps crossbar switching fabric provides wire-speed intra- and inter-module switching with up to 48 million pps throughput built on HP custom-designed ASIC technology

\nResiliency and high availability
\n• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking: support up to 60 trunks, each with up to eight links (ports) per trunk

\nManageability
\n• sFlow (RFC 3176): wire-speed traffic accounting and monitoring

\nLayer 2 switching
\n• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously\n

J8772B Specifications

Management features
Switch type: Managed
MIB support: Repeater MIB; Ethernet Interface MIB; IEEE 802.3 Ethernet MIB
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 72
Console port: RS-232
Data transmission
Switching capacity: 38.4 Gbit/s
Throughput: up to 22.4 million pps
Maximum data transfer rate: 0.1 Gbit/s
Protocols
Supported network protocols: RFC 783 TFTP; RFC 1542 BootP; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 SNTP; RFC 2030 Simple Network Time Protocol; IEEE 802.3x Flow Control; DHCP Relay; RFC 3046 DHCP Relay Agent Information Option 82; RF
Design
Safety: CSA 22.2 No. 950; UL 60950; EN 60950
Electromagnetic compatibility: FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; CISPR 22 Class A; EN 55024; IEC/EN 61000-3-2; IEC/EN 61000-3-3
Performance
Stackable: No
Built-in processor: Motorola PowerPC MPC8245
Processor frequency: 330 MHz
Internal memory: 64 MB
Flash memory: 24 MB
Packet buffer memory: 36 MB
Power
Input voltage: 100-127 / 200-240 VAC
Power consumption (typical): 630 W
Input current: 8.2 / 3.8 A
Power over Ethernet (PoE)
Power over Ethernet (PoE): No
Operational conditions
Operating temperature (T-T): 0 - 40 ?C
Storage temperature (T-T): -40 - 70 ?C
Operating temperature (T-T): 32 - 104 ?F
Weight & dimensions
Weight: 10.8 kg
Packaging data
Package weight: 7.19 kg
Other features
Management platform: HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (DB-9 serial port console); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
Latency: Latency: < 6 ?s (FIFO)
Data transfer rate: 10 Mbit/s
Dimensions (WxDxH): 388.6 x 442 x 133.4 mm
Connectivity technology: Wired
Memory and processor: Fabric: Motorola PowerPC MPC8245 @ 330 MHz, 24 MB flash, packet buffer size: 36 MB, 64 MB SDRAM
Power requirements: 100-127 VAC/200-240 VAC; 50/60 Hz
Power supply type: 1 x J4839A
Mounting: Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only.
Remote administration: command-line interface; Web browser; configuration menu; out-of-band management (DB-9 serial port console)
Supported protocols: General protocols\nHTML and telnet management\nIEEE 802.1AB Link Layer Discovery Protocol (LLDP); RFC 1757 RMON 4 groups: Stats, History, Alarms and Events; RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (e
Input frequency: 50 / 60
I/O ports: 2 open module slots; 72 auto-sensing 10/100 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX), Media Type: Auto-MDIX, Duplex: half or full; Supports a maximum of 120 auto-sensing 10/100 ports or 48 Gigabit ports or 8 mini-GBICs or 2
Electromagnetic emissions: FCC Class A; VCCI Class A; EN55022/CISPR-22 Class A; CISPR22 Class A; EN55024; IEC/EN61000-3-2; IEC/EN61000-3-3
Electromagnetic immunity: EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
Management product name: HP ProCurve Manager Plus; HP ProCurve Manager (included)
Weight: Fully loaded\n23.81 lb.
Operating altitude (imperial): up to 15000 ft.
Power supply slots open: 1
Switch fabric speed: 33.6 Gbps
J8772B Stock

Why Choose MCi4Trade

New and Refurbished Stock!
Competitive prices helping increase your Margins!
We can source hard to find / legacy kit!
International Shipping.
Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.