E4208-68G-4SFP vl Switch | HP J9030A

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J9030A

Hewlett Packard Enterprise E4208-68G-4SFP vl Switch. Switch type: Managed. Console port: RS-232. Switching capacity: 76.8 Gbit/s, Throughput: up to 48 million pps, Maximum data transfer rate: 1 Gbit/s. Management protocols: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, Switching protocols: Ethernet, Supported network protocols: RFC 783 TFTP; RFC 1542 BootP; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 SNTP; RF. Safety: CSA 22.2 No. 950; UL 60950; EN 60950, Electromagnetic compatibility: FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; CISPR 22 Class A; EN 55024; IEC/EN 61000-3-2;

The HP 4200 vl Switch Series consists of modular chassis that provide a flexible, cost-effective LAN solution as an alternative to stackable switches. These switches offer a proven chassis form factor with high quality and reliability in 10/100, 10/100/1000, and 10-Gigabit scalable solutions that integrate easily into any network.

Quality of Service (QoS)
\n• Traffic prioritization (IEEE 802.1p): allows real-time traffic classification into eight priority levels mapped to eight queues

\nManagement
\n• Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops

\nConnectivity
\n• Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

\nPerformance
\n• Architecture: up to 76.8 Gbps crossbar switching fabric provides wire-speed intra- and inter-module switching with up to 48 million pps throughput built on HP custom-designed ASIC technology

\nResiliency and high availability
\n• IEEE 802.3ad Link Aggregation Control Protocol (LACP) and HP port trunking: support up to 60 trunks, each with up to eight links (ports) per trunk

\nManageability
\n• sFlow (RFC 3176): wire-speed traffic accounting and monitoring

\nLayer 2 switching
\n• VLAN support and tagging: supports IEEE 802.1Q (4,094 VLAN IDs) and 256 VLANs simultaneously\n

J9030A Specifications

Management features
Switch type: Managed
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 68
SFP/SFP+ slots quantity: 68
SFP module slots quantity: 4
Console port: RS-232
Networking
Full duplex: Yes
Data transmission
Switching capacity: 76.8 Gbit/s
Throughput: up to 48 million pps
Maximum data transfer rate: 1 Gbit/s
Protocols
Management protocols: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c
Switching protocols: Ethernet
Supported network protocols: RFC 783 TFTP; RFC 1542 BootP; RFC 768 UDP; RFC 792 ICMP; RFC 793 TCP; RFC 826 ARP; RFC 2030 SNTP; RFC 2030 Simple Network Time Protocol; IEEE 802.3x Flow Control; DHCP Relay; RFC 3046 DHCP Relay Agent Information Option 82; RF
Design
Safety: CSA 22.2 No. 950; UL 60950; EN 60950
Electromagnetic compatibility: FCC Class A; VCCI Class A; EN 55022/CISPR 22 Class A; CISPR 22 Class A; EN 55024; IEC/EN 61000-3-2; IEC/EN 61000-3-3
Performance
Stackable: Yes
Built-in processor: Motorola PowerPC MPC8245
Processor frequency: 330 MHz
Internal memory: 64 MB
Flash memory: 24 MB
Power
Input voltage: 100-127 / 200-240 VAC
Power consumption (typical): 630 W
Input current: 8.2 / 3.8 A
Power over Ethernet (PoE)
Power over Ethernet (PoE): No
Operational conditions
Operating temperature (T-T): 0 - 40 ?C
Storage temperature (T-T): -40 - 70 ?C
Operating temperature (T-T): 32 - 104 ?F
Heat dissipation: 2152 BTU/h
Weight & dimensions
Weight: 14 kg
Other features
Management platform: HP PCM+; HP PCM (included); command-line interface; Web browser; configuration menu; out-of-band management (DB-9 serial port console); IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB
Latency: Latency: < 6 ?s (FIFO)
Dimensions (WxDxH): 388.6 x 442 x 222.3 mm
Memory and processor: Fabric: Motorola PowerPC MPC8245 @ 330 MHz, 24 MB flash, packet buffer size: 36 MB, 64 MB SDRAM
Power requirements: 100-127 VAC/200-240 VAC; 50/60 Hz
Power supply type: 1 x J4839A
Supported protocols: IGMPv2, IGMP, IGMPv3
Input frequency: 50 / 60
Expansion slots: 4 x mini-GBIC (SFP)
I/O ports: 5 open module slots; 68 auto-sensing 10/100/1000 ports(IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T), Media Type: Auto-MDIX, Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only; 4 open mini-GB
Electromagnetic emissions: FCC Class A; VCCI Class A; EN55022/CISPR-22 Class A; CISPR22 Class A; EN55024; IEC/EN61000-3-2; IEC/EN61000-3-3
Technical features: Hot-swappable modulesHot-swappable modules: permit modules and mini-GBICs to be added or swapped without interrupting the network\nOptional redundant power supplyOptional redundant power supply: provides uninterrupted power; allows hot
Electromagnetic immunity: EN 55024, CISPR 24; IEC 61000-4-2; IEC 61000-4-3; IEC 61000-4-4; IEC 61000-4-5; IEC 61000-4-6; IEC 61000-4-8; IEC 61000-4-11; EN 61000-3-2, IEC 61000-3-2; EN 61000-3-3, IEC 61000-3-3
Weight: Fully loaded\n30.88 lb.
Operating altitude (imperial): up to 15000 ft.
Power supply slots open: 1
Switch fabric speed: 76.8 Gbps
J9030A Stock

Why Choose MCi4Trade

New and Refurbished Stock!
Competitive prices helping increase your Margins!
We can source hard to find / legacy kit!
International Shipping.
Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.