E5412-92G-PoE+/4G-SFP v2 zl w/PS | HP J9540A

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J9540A

Hewlett Packard Enterprise E5412-92G-PoE+/4G-SFP v2 zl w/PS. Switch type: Managed, MIB support: MLDv1 MIB, MIB II, Bridge MIB, RIPv2 MIB, OSPFv2 MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU M. Basic switching RJ-45 Ethernet ports quantity: 96, 92, 96, Copper ethernet cabling technology: 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T. Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.. MAC address table: 64000 entries, Supported data transfer rates: 10/100 Mbps, Switching capacity: 758.4 Gbit/s. Security algorithms: 802.1x RADIUS, SSH, SSL/TLS

The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion. With 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE; integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.

Software-defined networking
\n• OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths

\nQuality of Service (QoS)
\n• Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis

\nManagement
\n• Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch located anywhere on the network

\nConnectivity
\n• IEEE 802.3az Energy Efficient Ethernet: lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)

\nPerformance
\n• High-speed, high-capacity architecture: 1 Tbps crossbar switching fabric provides intra-module and inter-module switching with 585.6 million pps throughput on the purpose-built ProVision ASICs

\nResiliency and high availability
\n• Virtual Router Redundancy Protocol: allows groups of two routers to dynamically back each other up to create highly available routed environments

\nLayer 2 switching
\n• VLAN support and tagging: supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously\n

J9540A Specifications

Management features
Switch type: Managed
MIB support: MLDv1 MIB, MIB II, Bridge MIB, RIPv2 MIB, OSPFv2 MIB, RMONv2 MIB, SMON MIB, Ethernet-Like-MIB, MAU MIB, Entity MIB, VRRP MIB, Ping MIB
Quality of Service (QoS) support: Yes
Multicast support: Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 96, 92, 96
SFP/SFP+ slots quantity: 4
SFP module slots quantity: 4
Copper ethernet cabling technology: 1000BASE-T, 1000BASE-TX, 100BASE-TX, 10BASE-T
Networking
Networking standards: IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
Full duplex: Yes
Flow control support: Yes
Link aggregation: Yes
Broadcast storm control: Yes
Rate limiting: Yes
DHCP client: Yes
DHCP server: Yes
IP routing: Yes
IGMP snooping: Yes
Auto MDI/MDI-X: Yes
Spanning tree protocol: Yes
Routing entries: 10000
10G support: Yes
Data transmission
MAC address table: 64000 entries
Supported data transfer rates: 10/100 Mbps
Switching capacity: 758.4 Gbit/s
Throughput: 564.2 mpps
Number of VLANs: 2048
Maximum data transfer rate: 1 Gbit/s
Security
Security algorithms: 802.1x RADIUS, SSH, SSL/TLS
MAC address filtering: Yes
Access Control List (ACL): Yes
SSH/SSL support: Yes
Protocols
Management protocols: IGMPv3, SNMPv1/v2c/v3, XRMON
Switching protocols: RIPv1
Data link protocols: LLDP
Supported network protocols: IPv6, UDP, TFTP, ICMP, TCP, ARP, Telnet, BOOTP, TFTP, CIDR, SNTP
Design
Safety: CSA, UL, IEC, EN
Electromagnetic compatibility: FCC, VCCI, EN/CISPR
Performance
Built-in processor: PowerPC 8540
Processor frequency: 666 MHz
Internal memory: 256 MB
Memory type: DDR
Flash memory: 128 MB
Noise level: 64 dB
Packet buffer memory: 4 MB
Power
Input voltage: 100 - 240
Power consumption (typical): 312 W
Number of power supply units: 2
Power over Ethernet (PoE)
Power over Ethernet (PoE): Yes
Operational conditions
Operating temperature (T-T): 0 - 55 ?C
Storage temperature (T-T): -40 - 70 ?C
Operating relative humidity (H-H): 15 - 95%
Storage relative humidity (H-H): 15 - 95%
Operating altitude: 0 - 3000 m
Operating temperature (T-T): 32 - 131 ?F
Heat dissipation: 7400 BTU/h
Weight & dimensions
Weight: 34 kg
Other features
Latency: 3.7?s/2.1?s
Dimensions (WxDxH): 450.9 x 444.5 x 307.3 mm
Weight: 33.96 kg
Connectivity technology: Wired
Power supply: 1500 W
Networking features: Gigabit Ethernet
Wi-Fi: No
Mounting: EIA
Input frequency: 50/60
Acoustic pressure emissions: 57.5 dB
Weight: 74.86
Dimensions (W x D x H): 444.5 x 450.9 x 307.3 mm (17.5 x 17.8 x 12.1")
J9540A Stock

Why Choose MCi4Trade

• New and Refurbished Stock!
• Competitive prices helping increase your Margins!
• We can source hard to find / legacy kit!
• International Shipping.
• Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.

View Other HP Products

View other products by HP please click here

HP Education Discount

HP Government Discount