8206-44G-PoE+-2XG v2 zl | HP J9638A

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J9638A

Hewlett Packard Enterprise 8206-44G-PoE+-2XG v2 zl. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Console port: RS-232. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u. MAC address table: 64000 entries, Supported data transfer rates: 10/100/1000 Mbps, Switching capacity: 496.8 Gbit/s. Management protocols: SNMPv1/v2c/v3

The HP 8200 zl Switch Series offers high performance, scalability, and a wide range of features in a high-availability platform that dramatically reduces complexity and provides reduced cost of ownership. As part of a unified wired and wireless network infrastructure solution, the 8200 zl switch series provides platform technology, system software, system management, application integration, wired and wireless integration, network security, and support that are common across HP modular and fixed-port switches.\n\nTogether, they deliver an agile, cost-effective, high-availability network solution. With key technologies to provide solution longevity, the 8200 zl switch series is built to deliver long-term investment protection without added complexity for network core, aggregation, and high-availability access layer deployments.\n\nIt provides these capabilities while bringing to market the industry's first highly available switch with a lifetime warranty.\n\nSoftware-defined networking\nOpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths\nQuality of Service (QoS)\nAdvanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis\nLayer 4 prioritization: enables prioritization based on TCP/UDP port numbers\nTraffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues\nBandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.\nClass of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ\nHP AllianceOne integration\nHP AllianceONE Services zl Module: allows you to embed applications directly into the network, either distributed throughout the network at the network edge or centralized in the core or distribution layer; for more information about the HP AllianceONE solution, visit the HP website\nManagement\nRemote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch anywhere on the network\nRMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events\nIEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications\nUni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops\nHP unified core-to-edge device/network management tools: provide HP networking portfolio-common device-level tools (CLI, Web GUI, and Menu) plus seamless integration into HP PCM+/Identity Driven Manager (IDM) network management deployments

J9638A Specifications

Management features
Switch type: Managed
Switch layer: L3
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 44
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
SFP+ module slots quantity: 2
Console port: RS-232
Networking
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3at, IEEE 802.3u
Full duplex: Yes
Flow control support: Yes
Link aggregation: Yes
DHCP client: Yes
Auto MDI/MDI-X: Yes
Spanning tree protocol: Yes
10G support: Yes
VLAN support: Yes
Data transmission
MAC address table: 64000 entries
Supported data transfer rates: 10/100/1000 Mbps
Switching capacity: 496.8 Gbit/s
Throughput: 369.6 Mpps
Latency (1 Gbps): 3.7 ?s
Latency (10 Gbps): 2.1 ?s
Maximum data transfer rate: 1 Gbit/s
Protocols
Management protocols: SNMPv1/v2c/v3
Design
Rack mounting: Yes
Form factor: 6U
Colour of product: Black, Grey
Safety: CSA, UL, IEC, EN
Electromagnetic compatibility: FCC, ICE, VCCI, EN
Performance
Stackable: No
Noise level: 60 dB
Power
AC input voltage: 100-240 V
Power supply included: Yes
AC input frequency: 50/60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE): Yes
Operational conditions
Operating temperature (T-T): 0 - 45 ?C
Storage temperature (T-T): -40 - 70 ?C
Operating relative humidity (H-H): 15 - 95%
Storage relative humidity (H-H): 15 - 95%
Operating altitude: 0 - 3000 m
Heat dissipation: 2450 BTU/h
Weight & dimensions
Width: 44.2 cm
Depth: 44.4 cm
Height: 26.3 cm
Weight: 27.9 kg
Other features
Latency: 3.7
Dimensions (WxDxH): 442.5 x 444.2 x 262.9 mm
Connectivity technology: Wired
Ethernet LAN: Yes
J9638A Stock

Why Choose MCi4Trade

• New and Refurbished Stock!
• Competitive prices helping increase your Margins!
• We can source hard to find / legacy kit!
• International Shipping.
• Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.

View Other HP Products

View other products by HP please click here

HP Education Discount

HP Government Discount