5406 zl | HP J9642AR

PLEASE CONTACT US FOR AVAILABILITY & PRICE

J9642AR

Hewlett Packard Enterprise 5406 zl, ProCurve. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000). MAC address table: 64000 entries, Switching capacity: 379.2 Gbit/s, Throughput: 282.1 Mpps. Form factor: 4U, Colour of product: Grey. Built-in processor: ARM9 @ 200 MHz, Freescale PowerPC 8540 @ 666 MHz, Internal memory: 256 MB, Memory type: DDR SDRAM

The HP 5400 zl Switch Series consists of advanced intelligent switches in the HP modular chassis product line, which includes 6-slot and 12-slot chassis and associated zl modules and bundles. The foundation for the switch series is a purpose-built, programmable ProVision ASIC that allows the most demanding networking features, such as Quality of Service (QoS) and security, to be implemented in a scalable yet granular fashion.\n\nWith 10/100, Gigabit Ethernet, and 10 Gigabit Ethernet interfaces; choice of PoE+ and non-PoE; integrated Layer 3 features; and HP AllianceOne solutions, the 5400 zl switch series offers excellent investment protection, flexibility, and scalability, as well as ease of deployment, operation, and maintenance.\n\nFeatures\n\nSoftware-defined networking\n- OpenFlow: is a key technology that enables software-defined networking by allowing the separation of data (packet forwarding) and control (routing decision) paths\n\nQuality of Service (QoS)\n- Advanced classifier-based QoS: classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a per-port or per-VLAN basis\n- Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers\n- Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues\n- Bandwidth shaping: Port-based rate limiting: provides per-port ingress-/egress-enforced increased bandwidth. Classifier-based rate limiting: uses an access control list (ACL) to enforce increased bandwidth for ingress traffic on each port. Reduced bandwidth: provides per-port, per-queue egress-based reduced bandwidth.\n- Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), Layer 3 protocol, TCP/UDP port number, source port, and DiffServ\n\nManagement\n- Remote intelligent mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote HP 8200 zl, 6600, 6200 yl, 5400 zl, or 3500 Switch located anywhere on the network\n- RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events\n- IEEE 802.1AB Link Layer Discovery Protocol (LLDP): advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications\n- Uni-Directional Link Detection (UDLD): monitors a cable between two switches and shuts down the ports on both ends if the cable is broken, turning the bidirectional link into a unidirectional one; this prevents network problems such as loops\n- Management simplicity: provides common software features and CLI implementation across all HP ProVision-based switches (including the zl and yl switches)\n\nConnectivity\n- IEEE 802.3az Energy Efficient Ethernet: lowers power consumption in periods of low link usage (supported on v2 zl 10/100/1000 and 10/100 modules)\n- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras\n- IEEE 802.3at Power over Ethernet Plus: provides up to 30 W per port to IEEE 802.3 for PoE- and PoE+-powered devices, such as video IP phones, IEEE 802.11n wireless access points, and advanced pan/zoom/tilt security cameras\n- Prestandard PoE support: detects and provides power to prestandard PoE devices\n- High-density port connectivity: provides up to 12 interface module slots and up to 288 wire-speed 10/100/1000 PoE-enabled ports or 96 10-GbE ports per system

J9642AR Specifications

Management features
Switch type: Managed
Switch layer: L3
Quality of Service (QoS) support: Yes
Multicast support: Yes
Web-based management: Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 48
Basic switching RJ-45 Ethernet ports type: 10G Ethernet (100/1000/10000)
SFP+ module slots quantity: 2
Networking
DHCP client: Yes
DHCP server: Yes
IP routing: Yes
IGMP snooping: Yes
Auto MDI/MDI-X: Yes
Spanning tree protocol: Yes
10G support: Yes
VLAN support: Yes
Auto-sensing: Yes
Data transmission
MAC address table: 64000 entries
Switching capacity: 379.2 Gbit/s
Throughput: 282.1 Mpps
Latency (1 Gbps): 3.7 ?s
Latency (10 Gbps): 2.1 ?s
Security
Access Control List (ACL): Yes
SSH/SSL support: Yes
Design
Rack mounting: Yes
Form factor: 4U
Colour of product: Grey
Performance
Built-in processor: ARM9 @ 200 MHz, Freescale PowerPC 8540 @ 666 MHz
Internal memory: 256 MB
Memory type: DDR SDRAM
Flash memory: 4 MB
Power
AC input voltage: 100-240 V
Power supply included: Yes
AC input frequency: 50/60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE): No
Operational conditions
Heat dissipation: 2450 BTU/h
Weight & dimensions
Width: 44.5 cm
Depth: 45.1 cm
Height: 17.5 cm
Weight: 10.7 kg
J9642AR Stock

Why Choose MCi4Trade

• New and Refurbished Stock!
• Competitive prices helping increase your Margins!
• We can source hard to find / legacy kit!
• International Shipping.
• Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.

View Other HP Products

View other products by HP please click here

HP Education Discount

HP Government Discount