5800-48G Switch w/2 Interface Slots | HP JC101AR

PLEASE CONTACT US FOR AVAILABILITY & PRICE

Two weeks - Renew 2 week ETA

Hewlett Packard Enterprise 5800-48G Switch w/2 Interface Slots, A. Switch type: Managed, Switch layer: L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Console port: RJ-45. Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u. MAC address table: 32000 entries, Switching capacity: 284 Gbit/s, Throughput: 211 Mpps. Form factor: 2U, Colour of product: Grey

HP 5800 series switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. In addition to wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP), which allow local or geographically distributed HP 5800 switches to be interconnected for higher resiliency and performance.\n\nAvailable in PoE and non-PoE models as well as 1 RU and 2 RU form factor configurations, HP 5800 switches are built on open standards and include an open application architecture (OAA) module slot that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core of buildings or departments, or as high-performance switches in the convergence layer or network edge of enterprise campus networks.\n\nFeatures\n\nQuality of Service (QoS)\n- Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, and DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR\n- Integrated network services: with support for open application architecture (OAA) modules, extends and integrates application capability into the network\n- Ring Resiliency Protection Protocol (RRPP): provides fast recovery for ring Ethernet-based topology; provides consistent application performance for applications such as VoIP\n\nManagement\n- Remote configuration and management: enables configuration and management through a secure Web browser or a CLI located at a remote device\n- IEEE 802.1ab LLDP discovery: advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications\n- USB support: File copy: allows users to copy switch files to and from a USB flash drive .\n- DHCP options: - DNS Relay and SMTP Redirection. - DHCP Server (RFC 2131), Client, and Option-82 Relay (RFC 3046).\n- sFlow: provides scalable, ASIC-based networkmonitoring and accounting; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes\n\nConnectivity\n- High-density port connectivity: supports up to 84 1-Gigabit ports per unit (612 per stack)\n- Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 ports\n- Jumbo frames: on Gigabit Ethernet and 10-Gigabit ports, jumbo frames of 9k size allow high-performance remote backup and disaster-recovery services\n- IEEE 802.3af Power over Ethernet (PoE): provides up to 15.4 W per port to IEEE 802.3af-compliant PoE-powered devices such as IP phones, wireless access points, and security cameras\n- IEEE 802.3at Power over Ethernet (PoE+) support: simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location\n\nPerformance\n- Hardware-based wire-speed access control lists (ACLs): helps provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation\n- Unique versatile architecture: supports the best of both fixed-port and modular configurations

JC101AR Specifications

Management features
Switch type: Managed
Switch layer: L3
MIB support: Y
Quality of Service (QoS) support: Yes
Multicast support: Yes
Web-based management: Yes
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity: 48
Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000)
SFP module slots quantity: 4
Console port: RJ-45
Networking
Networking standards: IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Full duplex: Yes
Flow control support: Yes
Port mirroring: Yes
Link aggregation: Yes
DHCP client: Yes
DHCP server: Yes
IP routing: Yes
IGMP snooping: Yes
Auto MDI/MDI-X: Yes
Spanning tree protocol: Yes
Routing entries: 16000
10G support: Yes
VLAN support: Yes
Auto-sensing: Yes
Data transmission
MAC address table: 32000 entries
Switching capacity: 284 Gbit/s
Throughput: 211 Mpps
Security
MAC address filtering: Yes
Access Control List (ACL): Yes
SSH/SSL support: Yes
Design
Rack mounting: Yes
Form factor: 2U
Colour of product: Grey
Performance
Internal memory: 1024 MB
Memory type: SDRAM
Flash memory: 512 MB
Packet buffer memory: 8 MB
Power
AC input voltage: 100-240 V
Power supply included: No
AC input frequency: 50/60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE): No
Operational conditions
Heat dissipation: 6278 BTU/h
Weight & dimensions
Width: 44 cm
Depth: 46.5 cm
Height: 8.61 cm
Weight: 18 kg
JC101AR Stock

Why Choose MCi4Trade

• New and Refurbished Stock!
• Competitive prices helping increase your Margins!
• We can source hard to find / legacy kit!
• International Shipping.
• Unless otherwise specified at order we will replace any goods developing a fault within 3 months of purchase.

View Other HP Products

View other products by HP please click here

HP Education Discount

HP Government Discount